HJC RPHA-1N Arenas Rep Full Face Motorcycle Helmet - PSB Approved
-
S$1,049.00
or 3 installments of S$349.67 with
In compliance with LTA (Land Transport Authority) and the standards of PSB certification
HJC RPHA 1N Arenas Rep Full Face Motorcycle Helmet - PSB Approved
All new helmets are sold with Clear visor . Smoke visor on picture are for illustration purposes only
The RPHA 1 was designed and developed after several years of focused efforts and crucial feedback from top world class athletes in MotoGP. HJC’s top engineers went to work and created a race-bred helmet that is truly worthy of top race circuits around the world. The RPHA 1 is the very same model used by HJC’s world-class athletes in both MotoGP and WorldSBK, and HJC is set to finally launch it into full production with FIM homologation (FRHPhe-01)—the safety certification.
SPECIFICATIONS
Sizing
| Size | Cheek | Pads | Liner |
|---|---|---|---|
| 2XS | 52-53 cm | 45mm | 12mm |
| XS | 54-55 cm | 40mm | 9mm |
| S | 55-56 cm | 40mm | 12mm |
| M | 57-58 cm | 35mm | 19mm |
| L | 58-59 cm | 40mm | 9mm |
| XL | 60-61 cm | 40mm | 9mm |
| 2XL | 62-63 cm | 35mm | 7mm |
VISOR / SUN SHIELD OPTIONS
- PINLOCK READY HJ-35 SHIELD PROVIDES 99% UV PROTECTION, ANTI-SCRATCH COATED, DOUBLE LOCKING SYSTEM
- TEAR-OFF POSTS INSTALLED
- ALL-NEW EASY ATTACHMENT SYSTEM ALLOWS SIMPLE AND SECURE TOOL-LESS VISOR (SHIELD) REPLACEMENT
REPLACEMENT PARTS
- TOP / REAR / LOWER VENT
- CHIN CURTAIN
- BREATH DEFLECTOR
- GEAR PLATE SET
- CHEEK PADS
- HEADLINER
Technical Features
FIM RACING HOMOLOGATED HELMET
The RPHA 1 Racing Helmet is homologated according to the FIM Racing standards, and the new ECE 22.06 regulations.
PIM+ Shell
Reinforcement materials, including Carbon and Carbon-Glass Hybrid fabric, provide enhanced Shock-Resistant performance for a more comfortable and lighter helmet.
Wind Tunnel Tested
HJC helmets are tested in the laboratory as well as in “real-life” to meet the highest quality standards. HJC is one of the very few helmet companies equipped with its own state-of-the-art wind tunnel laboratory to test aerodynamics, ventilation, noise, and more. The HJC wind tunnel test lab measures the air forces in a variety of riding conditions to improve helmet performance.
SILVERCOOL
Advanced anti-bacterial fabric provides enhanced moisture-wicking and quick-drying function. Removable Interior. Glasses grooves can accommodate riders who wear glasses.
ACS - ADVANCED CHANNELING VENTILATION SYSTEM
HJC's helmets, along with our technology, have added experience in designing the MotoGP race helmets to have the best technology in aerodynamics and ventilation and related fields. HJC's helmets provide the airiest helmets on the market. Experience the best performance with your HJC helmet.
RPHA FEATURES
EMERGENCY KIT:
Emergency Kit (Cheek Pads) for safe and quick rescue in an emergency situation.
DOUBLE D-RING
RAPID FIRE™ SHIELD REPLACEMENT SYSTEM: A simple and secure shield ratchet system provides ultra-quick, tool-less removal, and installation for efficient operations.
5YEAR WARRANTY
The warranty is applicable to manufacturers defects for up to 5 years from the date of purchase, or 7 years from the date of manufacturing. (whichever comes first).
SHELL CLEANING
Only use approved methods to clean the helmet. Using other unapproved chemicals or methods may damage the helmet shell or lining. A damaged helmet may increase your risk of serious injury or death in an accident.
Glossy Finish: HJC recommends cleaning your helmet with products designed for automotive cleaning and polishing. All HJC helmets are finished with an automotive type base coat/clear coat finish. Rubbing compounds can be used for deep cleaning to remove many scratches and scuffs. Follow the product’s instructions diligently. Over polishing with rubbing compounds can cause light abrasions which may dull the finish of your helmet. Stickers and decals will leave adhesive residue when removed. To remove the adhesive residue, use alcohol swabs. Be certain to immediately wipe away the excess liquid and clean the area with soap and water once the adhesive residue is removed. Do not use excessive pressure while rubbing when attempting to remove the adhesive residue, instead use multiple light treatments.
Non-Glossy Finish: For our flat finish (non-glossy) helmets, we recommend using warm water and mild soap. Use multiple treatments for heavier dirt. Do not use excessive pressure or rubbing compounds while cleaning the surface as a “glossy” effect could be created, ruining the flat finish appearance.
INTERIOR CLEANING
Although we recommend changing a helmet every 3 to 5 years, the accumulation of sweat, humidity, and dirt can deteriorate the fabric and stitching and this may cause odor. To wash HJC removable pads, HJC recommends regular machine washing and air drying.
For non-removable interiors, HJC recommends using bacteria and mildew eliminating products such as “Helmet Fresh”.
VENT CLEANING
Dirt and debris can find its way into the venting of your HJC helmet. Compressed air cans used for cleaning computer keyboards may be used to blow the debris from the ventilation system. It is recommended that you remove any removable pads before doing this process.
REPLACEMENT PARTS
Use of replacement parts not manufactured by HJC may increase your risk of serious injury or death in an accident. Only use HJC parts that are specifically designed to work with this helmet.
DO NOT MODIFY YOUR HELMET
Your HJC helmet is designed to meet SNELL and DOT standards. Contact HJC America for more information about SNELL and DOT standards. Modifying your helmet may increase your risk of serious injury or death in an accident. Do not modify your HJC helmet. Modifications include the following:
drilling holes;
cutting shell, liner, or strap;
modifying the retention system, including adding a chin cup;
removing parts;
painting and attaching accessories that are not manufactured by HJC for this helmet.
If you have any questions about modifications, please email us at info@hjchelmets.com.
STORING YOUR HELMET CORRECTLY
An improperly stored helmet can become damaged and may increase your risk of serious injury or death in an accident. You should:
Store helmet in a cool and dry place,
Keep helmet away from pets and other animals,
Keep helmet away from the heat in excess of 50ºC and do not set on or near hot surfaces.
