Motoworld Singapore

SBS 762DC Front Dual Carbon Motorcycle Brake Pad

SBS
  • S$67.20 S$84.00
  • or 3 installments of S$22.40 with atome

Please Note that every product is a set of pads for 1 caliper therefore for 1 disk, so if your bike has two front disk the right quantity is 2 products.

The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”.
World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.

Characteristics:

  • Thermal bedding-in and brake fade eliminated by use of DEST technology.
  • High initial bite
  • High friction level and progressive brake feel.
  • High thermal stability.
  • Consistent brake performance and brake lever position.
  • Low pad wear.
  • Rotor friendly due to transfer film generated on disc surface.
  • Available for the majority of new Superstock, Supersport and racing brake calipers.
  • Recommended for top level international and national championship road racing.
  • For race use only

Bedding-in procedure for SBS-DC.
When changing for SBS-DC from using another type of brake pad material - Follow this Bedding-in procedure very carefully:

  1. Remove existing friction material deposit from brake discs - using eg. emery paper #150
  2. Do a series of gentle brakings until pad-surface is in full contact with disc-surface.
  3. After pad/disc contact is achieved - repeated short brakings building up heat in discs and pads until a very thin and uniform dull/black/darkblue layer of friction material (transfer film) is established on the brake disc.
  4. Then a period to allow discs to cool again before proper use.
  5. Then a few easy laps building up heat - ready for race use.

When bedding-in procedure IS needed. Always follow the above bedding-in procedure - when changing for SBS-DC for the first time OR when using new brake discs.

When bedding-in procedure is NOT needed.When brake discs are covered by SBS-DC friction material (transferfilm) - new pads only need about one/two laps to be in full contact with disc-surface - then the pads are race ready (Thermal bedding-in as described above in point 1. - 4. is not needed)
Cleaning of brake discs - NOT when using SBS-DC
When brake discs are covered by SBS-DC friction material (transferfilm) - Do not clean/sand/grind the brake discs after each session.

Please Note that every product is a set of pads for 1 caliper therefore for 1 disk, so if your bike has two front disk the right quantity is 2 products

We work hard every day to correct any application mistake, we published all the information we have to let you check if the pads are correct, before ordering use the informations you find on our web site,

We provided all the tools to ensure the compatibility, on our part we can not be responsible for any application mistake, however , before and after your purchase we will be glad to assist you, to advise and to solve any issues and to facilitate an eventual replacement .

Brand Model Year
APRILIA RSV-1000 2002 - 2003
APRILIA RSV Factory Pista-1000 2004
APRILIA RSV Nera-1000 2004
APRILIA RSV R-1000 2001 - 2007
APRILIA RSV R Factory-1000 2004 - 2008
BENELLI BX Supermotard-449 2008 - 2010
BENELLI Tornado TRE RS-900 2004 - 2006
BIMOTA 3D Tesi-1100 2007 - 2011
BIMOTA DB5-1000 2005 - 2011
BIMOTA DB5 S-1000 2007 - 2011
BIMOTA DB7-1098 2008
BIMOTA SB8K Santamonica-1000 2007 - 2009
BMW G SMR-450 2009 - 2010
DUCATI 999 2003 - 2007
DUCATI S-749 2003 - 2007
DUCATI R-748 2001 - 2002
DUCATI R-749 2004 - 2007
DUCATI R-996 2001
DUCATI R-998 2002 - 2004
DUCATI R-999 2003 - 2007
DUCATI RS -996 2000 - 2001
DUCATI RS -998 2002 - 2003
DUCATI RS -999 2004 - 2005
DUCATI S-999 2003 - 2007
KTM Duke R-690 2010 - 2011
MV AGUSTA F4 R-1000 2006 - 2007
Product type: Brake pads
Quality: DC
Catalog number: 762
Numbers in set: 4
Rear plate height: 40.50
Rear plate width: 34.90
Total thickness: 7.50
Payment Methods

© 2024 Motoworld Singapore \ Privacy Policy \ Terms & Condition

Newsletter

* E-Mail:

* First Name: