HJC I71 Peka Full Face Motorcycle Helmet - PSB Approved
-
S$320.00
or 3 installments of S$106.67 with
HJC I71 Peka Full Face Motorcycle Helmet
All new helmets are sold with Clear visor . Smoke visor on picture are for illustration purposes only
The i71 pushes the boundaries for a Sport-Touring model with its new sleek shell design. The Advanced Polycarbonate helmet now has 3 shells throughout the 6 available sizes to help optimize weight and comfort for the rider. The rearranged top vent with enlarged mouth vents allows increased air intake and ventilation. Also new with the i71 are both face shield and sun visor. The HJ-38 Pinlock ready face shield comes with a new PE (Push/Eject) locking system for improved safety, yet still easy to use with gloves. The new sun visor (HJ-V12) provides a new 3-position option for the rider to adjust the sun shield forward (up to 10mm) delivering ideal sun visor protection. The i71 will also accept the second-generation Smart HJC Bluetooth systems.
SPECIFICATIONS
Sizing
| Size | Cheek | Pads | Liner |
|---|---|---|---|
| XS | 54-55 cm | 25mm | 12mm |
| S | 55-56 cm | 20mm | 9mm |
| M | 57-58 cm | 30mm | 15mm |
| L | 58-59 cm | 25mm | 12mm |
| XL | 60-61 cm | 25mm | 12mm |
| 2XL | 62-63 cm | 20mm | 7mm |
INCLUDED IN THE BOX
- PINLOCK DKS466
VISOR / SUN SHIELD OPTIONS
- HJ-38 ANTI-FOG PINLOCK® READY VISOR
- HJ-38 MIRRORED ANTI-FOG PINLOCK® READY VISOR
- HJ-V12 SUN SHIELD
REPLACEMENT PARTS
- TOP / LOWER / REAR VENT
- GEAR PLATE
- BREATH DEFLECTOR
- CHIN CURTAIN
- CHEEK PADS
- HEADLINER
Technical Features
STANDARD DOT&ECE
- Meets or exceeds DOT FMVSS 218/ECE 22.05 approved.
- Testing includes energy attenuation, penetration resistance, chin strap structural integrity, and labeling requirements for on-road motorcycle helmets.
NEW SUN SHIELD MECHANISM
Integrated Sunshield: Anti-fog coated smoke tinted sun visor deploys quickly and easily by bottom positioned new operation system. Its new mechanism allows adjusting the depth in 3 different positions according to your morphology and preference for an optimal fit.
VISOR LOCK (PUSH & RELEASE SYSTEM)
The new visor lock is easier to open and safer thanks to its push and release system.
SMART HJC 2ND GENERATION
The SMART HJC 2ndgeneration premium Bluetooth communication system models implement an all-in-one design, that is fully integrated into the helmet, allowing you to feel the optimal weight balance and aerodynamic performance while riding. The SMART HJC 50B and 21B can be installed on RPHA 71, RPHA 91, RPHA 31, or i71. Co-developed with SENA and tailored specially for HJC helmets. *All SMART HJC devices are sold separately.
3YEAR WARRANTY
The warranty is applicable to manufacturers' defects for up to 3 years from the date of purchase or 5 years from the date of manufacturing (whichever comes first).
SHELL CLEANING
Only use approved methods to clean the helmet. Using other unapproved chemicals or methods may damage the helmet shell or lining. A damaged helmet may increase your risk of serious injury or death in an accident.
Glossy Finish: HJC recommends cleaning your helmet with products designed for automotive cleaning and polishing. All HJC helmets are finished with an automotive type base coat/clear coat finish. Rubbing compounds can be used for deep cleaning to remove many scratches and scuffs. Follow the product’s instructions diligently. Over polishing with rubbing compounds can cause light abrasions which may dull the finish of your helmet. Stickers and decals will leave adhesive residue when removed. To remove the adhesive residue, use alcohol swabs. Be certain to immediately wipe away the excess liquid and clean the area with soap and water once the adhesive residue is removed. Do not use excessive pressure while rubbing when attempting to remove the adhesive residue, instead use multiple light treatments.
Non-Glossy Finish: For our flat finish (non-glossy) helmets, we recommend using warm water and mild soap. Use multiple treatments for heavier dirt. Do not use excessive pressure or rubbing compounds while cleaning the surface as a “glossy” effect could be created, ruining the flat finish appearance.
INTERIOR CLEANING
Although we recommend changing a helmet every 3 to 5 years, the accumulation of sweat, humidity, and dirt can deteriorate the fabric and stitching and this may cause odor. To wash HJC removable pads, HJC recommends regular machine washing and air drying.
For non-removable interiors, HJC recommends using bacteria and mildew eliminating products such as “Helmet Fresh”.
VENT CLEANING
Dirt and debris can find its way into the venting of your HJC helmet. Compressed air cans used for cleaning computer keyboards may be used to blow the debris from the ventilation system. It is recommended that you remove any removable pads before doing this process.
REPLACEMENT PARTS
Use of replacement parts not manufactured by HJC may increase your risk of serious injury or death in an accident. Only use HJC parts that are specifically designed to work with this helmet.
DO NOT MODIFY YOUR HELMET
Your HJC helmet is designed to meet SNELL and DOT standards. Contact HJC America for more information about SNELL and DOT standards. Modifying your helmet may increase your risk of serious injury or death in an accident. Do not modify your HJC helmet. Modifications include the following:
drilling holes;
cutting shell, liner, or strap;
modifying the retention system, including adding a chin cup;
removing parts;
painting and attaching accessories that are not manufactured by HJC for this helmet.
If you have any questions about modifications, please email us at info@hjchelmets.com.
STORING YOUR HELMET CORRECTLY
An improperly stored helmet can become damaged and may increase your risk of serious injury or death in an accident. You should:
Store helmet in a cool and dry place,
Keep helmet away from pets and other animals,
Keep helmet away from the heat in excess of 50ºC and do not set on or near hot surfaces.
